(AS) KUANA S + Phase dim driver 3000K Noir
Référence Interne : AKUA09DP801B
Module LED - Semi- recessed ceiling type LED downlight IP54 equipped with :
- a visible finishing ring with a height of 30mm epoxy paint - available in White-Black-Champagne finish - Overall diameter of 80mm.
- a silver reflector ensuring non-glare, uniform and diffused lighting.
- a finned aluminum heat sink with two fixing clips. The module is equipped with a power supply cable for connection to the driver.
º COB (Chip on board) LED type with a power of 9W.
º Phase dim driver in constant current of 500mA.
º 2700K version: Ra >90
º 3000K version: Ra >90
- a visible finishing ring with a height of 30mm epoxy paint - available in White-Black-Champagne finish - Overall diameter of 80mm.
- a silver reflector ensuring non-glare, uniform and diffused lighting.
- a finned aluminum heat sink with two fixing clips. The module is equipped with a power supply cable for connection to the driver.
º COB (Chip on board) LED type with a power of 9W.
º Phase dim driver in constant current of 500mA.
º 2700K version: Ra >90
º 3000K version: Ra >90
| Couleur: Noir |
| Diam. percement: 68 mm |
| Puissance: 9 |
| IP: 0 |
| Gamme: KUANA S |
| Dimming: PHASE |
| mA CC: 500 |
| Lumen: 1000lm |
| Kelvin: 3000 K |
| IRC (Ra): >90 |
| Angle: 35 ° |
| Diam. extérieur: 80 mm |
| Classe énergétique EU 2022: E |
| Code Flux CIE: 96 99 100 100 79 |
Module LED - Semi- encastré de plafond type downlight LED IP54 muni :
- d’un anneau de finition apparent d'une hauteur de 30mm peinture époxy - existe en finition Blanc-Noir-Champagne - Diamètre hors tout de 80mm.
- d’un réflecteur argenté garantissant un éclairage non éblouissant, homogène et diffus.
- d’un refroidisseur à ailettes en aluminium avec deux clips de fixation. Le module est équipé d’un câble d’alimentation pour le raccordement au driver.
º LED type COB (Chip on board) d’une puissance de 9W.
º Phase dim driver en courant constant de 500mA.
º Version 2700K : Ra >90
º Version 3000K : Ra >90
- d’un anneau de finition apparent d'une hauteur de 30mm peinture époxy - existe en finition Blanc-Noir-Champagne - Diamètre hors tout de 80mm.
- d’un réflecteur argenté garantissant un éclairage non éblouissant, homogène et diffus.
- d’un refroidisseur à ailettes en aluminium avec deux clips de fixation. Le module est équipé d’un câble d’alimentation pour le raccordement au driver.
º LED type COB (Chip on board) d’une puissance de 9W.
º Phase dim driver en courant constant de 500mA.
º Version 2700K : Ra >90
º Version 3000K : Ra >90