Inter. diff. Teco 4P 25A 300mA Type S-B Var. F.
Internal Reference: F925403SBFQ
Mechanical indicator:
red-white : position on
green-white : position off after manual switch-off
green-blue : position off after error or pressing the test button
LED indicator
green : the loss current is less than 30% of the maximum loss current (normal situation)
yellow : the loss current is more than 30% of the maximum loss current
red : the loss current is more than 50% of the maximum loss current
Has a potential-free contact (for remote signalling) which is activated in parallel with the yellow LED. When the residual circuit breaker is switched off, the contact remains closed until the circuit breaker is switched on again.
Limited resistance to transient overloads 3kA 8/20µs.
Insensitive to frequency converters.
Conforms to
NBN EN 61008-1 based on EN 61008-1:2012 and
NBN EN 61008-2-1 based on EN 61008-2-1:1994 + A11:1998 and
NBN EN 62423:2013
Conforms to thermal requirement 3kA 22.5kA²s.
Electrical insulation: > 4mm between contacts.
(!) Attention: always connect the power supply (arrival) at the top (see also manual).
red-white : position on
green-white : position off after manual switch-off
green-blue : position off after error or pressing the test button
LED indicator
green : the loss current is less than 30% of the maximum loss current (normal situation)
yellow : the loss current is more than 30% of the maximum loss current
red : the loss current is more than 50% of the maximum loss current
Has a potential-free contact (for remote signalling) which is activated in parallel with the yellow LED. When the residual circuit breaker is switched off, the contact remains closed until the circuit breaker is switched on again.
Limited resistance to transient overloads 3kA 8/20µs.
Insensitive to frequency converters.
Conforms to
NBN EN 61008-1 based on EN 61008-1:2012 and
NBN EN 61008-2-1 based on EN 61008-2-1:1994 + A11:1998 and
NBN EN 62423:2013
Conforms to thermal requirement 3kA 22.5kA²s.
Electrical insulation: > 4mm between contacts.
(!) Attention: always connect the power supply (arrival) at the top (see also manual).
| I(n): 25 A |
| Pole: 4 |
| U(n): 400 V |
| Type: B |
| Code: 192736 |
| I(diff): 300 mA |
| Rated switching capacity (EN 61008): 10 kA |
| Selective: Oui |
| Digital: Oui |
| For environments with frequency inverters: Oui |
| Module: 4 |
Indicateur mécanique:
rouge-blanc : position on
vert-blanc : position off après intervention manuelle
vert-bleu : position off après défaut ou pression du bouton test
Indicateur LED:
vert : le courant de fuite mesuré est en dessous de 30% du courant de fuite maximal (situation normale)
jaune: le courant de fuite mesuré est au-dessus de 30% du courant de fuite maximal
rouge: le courant de fuite mesuré est au-dessus de 50% du courant de fuite maximal
Dispose d'un contact libre de potentiel (pour signalisation à distance) qui fonctionne en parallèle avec la LED jaune. Même si le différentiel déclenche en cas de défaut, le contact restera fermé jusqu'au reset.
Résistance aux surtensions: 3kA 8/20 µs.
Insensible aux convertisseurs de fréquence.
Conforme à la norme
NBN EN 61008-1 basée sur EN 61008-1:2012 et
NBN EN 61008-2-1 basée sur EN 61008-2-1:1994 + A11:1998 et
NBN EN 62423:2013
Conforme à la contrainte thermique 3kA 22.5kA²s.
Isolation électrique: > 4mm entre les contacts.
(!) Attention: alimentation (arrivée) toujours par le haut (voir manuel).
rouge-blanc : position on
vert-blanc : position off après intervention manuelle
vert-bleu : position off après défaut ou pression du bouton test
Indicateur LED:
vert : le courant de fuite mesuré est en dessous de 30% du courant de fuite maximal (situation normale)
jaune: le courant de fuite mesuré est au-dessus de 30% du courant de fuite maximal
rouge: le courant de fuite mesuré est au-dessus de 50% du courant de fuite maximal
Dispose d'un contact libre de potentiel (pour signalisation à distance) qui fonctionne en parallèle avec la LED jaune. Même si le différentiel déclenche en cas de défaut, le contact restera fermé jusqu'au reset.
Résistance aux surtensions: 3kA 8/20 µs.
Insensible aux convertisseurs de fréquence.
Conforme à la norme
NBN EN 61008-1 basée sur EN 61008-1:2012 et
NBN EN 61008-2-1 basée sur EN 61008-2-1:1994 + A11:1998 et
NBN EN 62423:2013
Conforme à la contrainte thermique 3kA 22.5kA²s.
Isolation électrique: > 4mm entre les contacts.
(!) Attention: alimentation (arrivée) toujours par le haut (voir manuel).